120-00011 Rev. New
Halimeter
PLUS User Manual
7/15/2020
11
A graphical display of the continuous reading
is also accessible during the breath sampling
periods by pressing the
RIGHT ARROW
button.
See section 5 for details on
operating in SAMPLE MODE and taking
samples.
Any mode can be entered from the preceding mode by pressing the
ENTER
button or
exited to the preceding mode by pressing the
STOP
button. Pressing the
STOP
button
successively will return the display to the MAIN MENU where the SETUP and FILE menus
can be accessed.
The Halimeter
PLUS includes a wall charger that can be used to recharge the Halimeter
PLUS batteries, as well as power the instrument during extended use.
The expected
battery capacity on a full charge is 5-8 hours depending on nature of use.
When the battery charge drops below 1
0%, the display will indicate “Low Battery!” at the
bottom of the screen. Follow the procedure below to re-charge the batteries:
1. Select the desired plug type on the multi-region charger plug unit.
2. Plug the large USB connector end of the supplied charger cable into one of the
charger’s USB ports.
3. Connect the mini-USB connector into the mini USB port on the front panel of the
instrument.
4. Plug the charger into the wall.
5. C
harge until the battery life indicator on the instrument display reads “100%”.
If charged with the power off, the Halimeter
PLUS will automatically power up to the MAIN
MENU as soon as the charger is connected to the
USB port. If the instrument is then powered down
the display will show a charging percentage
3.5 CHARGING THE BATTERIES
