5
Version 1.0 (11/2007) en
Original language
RollerDrive EC200
Safety
Risks
Persons
¾
Maintenance or repair work must only be executed by authorized and
qualified persons in accordance with the applicable regulations.
¾
Before turning on the RollerDrive, ensure that no unauthorized persons are
near the conveyor.
Electricity
¾
Only perform installation and maintenance work after you have switched off
the power. Ensure that the RollerDrive cannot be turned on accidentally.
Rotating parts
¾
Keep fingers and hair away from the torque transmission between rollers.
¾
Tie up long hair.
¾
Do not wear loose clothing.
¾
Remove jewellery such as bracelets or wristbands.
Working environment
¾
Do not use the RollerDrive in explosive atmospheres.
¾
Remove equipment or material which is not required from the workspace.
¾
Always wear safety shoes.
¾
Clearly specify and monitor the way goods are placed on the conveyor.
Avoiding malfunctions in
operation
¾
Regularly check the RollerDrive for visible damage.
¾
In case of fumes, unusual noise or blocked or damaged goods, stop the
RollerDrive at once and ensure that the RollerDrive cannot be started
accidentally.
¾
Contact qualified personnel immediately to find the source the malfunction.
¾
Do not step on the RollerDrive during operation.
Maintenance
¾
As the product is maintenance free, you only need to check regularly for
visible damages, unusual noise and that the screws and nuts are still
tightened.
¾
Do not open the RollerDrive.
Accidental motor starts
¾
Use caution while installing or maintaining the RollerDrive, or while it is under
error conditions, since it may start accidently.
Interfaces
By assembling the RollerDrive in a conveyor module, potential hazards may
occur. These are not part of this manual and have to be analyzed during the
design, installation and startup of the conveyor module.
¾
After assembling the RollerDrive in a conveyor module, check the whole
system for a new potential dangerous spot before turning on the conveyor.
Important
The following list informs you about the various types of danger or damage that
may occur while working with the RollerDrive EC200.
