Interroll Pallet Control PC 6000
Safety
Version 2 (02/2020) en
Translation of original operating instructions
9
Maintenance
4
Because the product does not require maintenance, you only need to inspect all components
regularly for visible damage and check that all cables and screws are firmly in place.
Accidental motor start
4
Ensure that a connected motor cannot start accidentally, particularly for assembly,
maintenance work and troubleshooting.
Interfaces to other devices
By installing the Pallet Control in a conveyor module, danger zones may arise. These danger
zones are not part of these operating instructions and must be analyzed during design, setup
and startup of the complete system.
4
After installing the Pallet Control in a conveyor module, check the complete system for
potential new danger zones switching on the conveyor.
Operating modes
Normal mode
Operation of the installed device at the end customer's as a component in a conveyor in a
complete system.
Special mode
Special operation refers to all operating modes that are required to guarantee and maintain
regular operation.
Special operating mode
Explanation
Comment
Transport/storage
Loading and unloading, transport and storage
-
Assembly/initial startup
Installation at the end customer and performing the test run
-
Cleaning
External cleaning without removing protective devices
When powered down
Maintenance/repairs
Maintenance and inspection tasks
When powered down
Troubleshooting
Troubleshooting in the event of a fault
-
Fault elimination
Eliminating the fault
When powered down
Decommissioning
Removal from the complete system
When powered down
Disposal
Removal from the complete system and disassembly
When powered down
