Interphase iSPAN, User Manual

Page: 139 / 236

Chapter 7: Installing SNA Server Link Services Software
iSPAN Serial WAN Adapter Users Guide
119
After all necessary files are copied for the selected link
service, the following setup message appears.
Figure 7-12. Successful Link Service Setup Message
10. Click OK to complete the Interphase link service
installation and return to the Microsoft SNA Server
Manager window.
11. If you need to install another Interphase link service,
repeat steps
2 through 11 , starting on page 114 .
To set up your new Interphase link service(s), see Setting up
SNA Server Link Services on page 123 .
Removing Base Driver Software
You cannot remove SNA link services without removing the
entire SNA Server software package. Only removal of the Base
driver is discussed in this chapter. See your Microsoft SNA
Server software documentation for information about
removing the SNA Server software package.
You can remove the Base driver without removing the SNA
Server software. However, if you remove the Base driver,
Interphase SNA Server link services will no longer be
available.