62
63
5. c) unlock blind
The "unlocking" function can only be carried out with the same remote control
which was used to lock the shading. If the remote control is no longer available,
it can be carried out by using the reset button on the shading (a push button
on the circuit board in the motor unit). NB: the shading needs to be removed for
this.
1.
select the ‘Menu’ function
© © £ ©
2.
press and hold = confirm selection
3.
press briefly = select channel which will be unlocked
© £ £ £
= channel 1
£ £ © £
= channel 3
£ © £ £
= channel 2
£ £ £ ©
= channel 4
© £ £ £
4.
press and hold = unlocking process is started
ª ª ª ª
5.
Unlocking process is completed, if previously selected LED
flashes
© £ £ £
6.
press briefly = function completed
7.
Further possibilities:
1) press and hold = repeat process
2) press briefly = to select an option from the ‘Menu’
3)
press and hold or no operation for 25 sec. =
finish installation mode
14_107_BHB_West.indd 62
02.06.14 13:00
Summary of Contents for I-tec Shading
