InternetVSAT.com Proprietary
Star Pro IDU Installation
Before a terminal can be operational InternetVSAT must be informed of certain parameters and
your GPS position then INTERNETVSAT can enable your terminal. You must email
INTERNETVSAT with the correct activation form 2 working days before installation of terminal to
enable INTERNETVSAT to program your system and respond with your Network IP address.
Please note that PAS1R activations make take slightly longer.
Computer specification and telnet window operation
300MHz & above should be good for video etc.
Network card essential
1) IP Address Calculation
To calculate the IP address from the Ethernet address use the Microsoft default calculator.
Select view/scientific.
Convert the last two octets of the MAC address (labelled Eth Addr) on the reverse of the unit
and convert from HEX to DEC. For example 9C.D0 converts to 10.0.156.208. 10.0 will always
complete the first 2 parts of the default IP address.
2) PC Configuration
Windows NT
From desktop right click on Network Neighborhood
Left click on Properties
Left click on Protocol flag
Highlight TCP/IP protocol
Left click on Properties
Left click on Specify an IP address for pc
Then enter the IP address you converted in step 1) as your gateway, and the pc ip address will
be one up from that address. So for the 9C.D0, we have:-
IP 10.0.156.209
Subnet Mask -255.255.255.0
Gateway 10.0.156.208
