Chapter 2: Configuring and Viewing Appliance Settings
14
Allowing SiteProtector Access to the Appliance
Introduction
You can automatically import authentication keys when you connect to SiteProtector. You
only need to import authentication keys once. All SiteProtector consoles that connect to
the appliance are granted access levels according to user permissions.
Note:
If you do not set up Site Protector access, the management console cannot
communicate with the appliance.
Procedure
To allow SiteProtector access:
1. Set up a local configuration interface and log in, as described in “Setting Up a Local
Configuration Interface and Logging In” on page 3.
2. On the Configuration menu, select
Allow SiteProtector Access
, and then press
ENTER
.
3. Type
A
to automatically import the authentication key.
Note:
When you select option
A
, the appliance receives the initial authentication key
over a standard network connection initiated from the SiteProtector console.
4. Press
ENTER
.
The message
Auto Import configured successfully
appears.
5. Press
ENTER
to return to the Configuration menu.