InterNEC I7-C5313, Quick Operation Manual, Page: 11 / 25

Network Camera
·
Quick Operation Guide
11
11
6. Insert the hex key into the hole marked in the picture and
rotate the hex key to adjust the panning position and tilting
position until getting the desired surveillance angle. Tighten
the set screws.
Figure 2-5 Panning and Tilting
Notes:

As the lens of camera has already been factory adjusted to
the best imaging effect, you just need to adjust the
panning position and tilting position to get the desired
surveillance angle.

Reinstall the cover before viewing the image of the camera
for you may get an unclear image without the cover.
7. Install the cover, and tighten the set screws.