Page 8
Install the Accordion Panel
Hold the accordion panel in one hand and
gently pull back to free the open end.
Slide the free end of the accordion panel
into the side panel rails. Slide the panel
down. Be sure to leave enough space to slip
the top and bottom of the frame into the rails
on the cabinet.
NOTE:
There is a right and a left accordion panel. Be
sure to use the proper panel for each side.
Slide the left and right accordion panels into
the top and bottom mounting rails.
Install
Your Air Conditioner in the
Window
NOTE:
Handle air conditioner gently.
Be sure your air conditioner does not fall out
of the opening during installation or removal.
The place where the power cord exits the air
conditioner should be no more than 4 ft (122
cm) from a grounded 3 prong outlet.
Do not block the louvers on the front panel.
Do not block the louvers on the outside of
the air conditioner.
Prepare the Window
Cut the window
sash seal to the
proper length. Peel
off the backing and
attach the seal to
the underside of the
window sash.
Install Your Unit
Center the air conditioner in window. Check
that lower rail of air conditioner is behind
and against back side of window sill.
Maintain a firm hold on the air conditioner
cabinet. Lower window sash to hold cabinet
in place.
Measure the distance between the right-
hand side of the cabinet and the inside of
the window channel.
Repeat for the left side. Adjust the cabinet
until the distance on each side is the same.
Extend the left and right accordion panels to
the vertical window sashes and use the
screws to attach (Refer to below installation
Fig. for the model you bought)
Models: WAC46115R, WAC48115R,
WA46YR, WA48YR
