North Washington Street, Wilkes-Barre, PA USA 18705
For Product Information, Call 1-800-433-2232
Pour de plus amples renseignements sur les produits, appeler au 570-825-2741
Para obtener información sobre el producto llame al: 570-825-2741
Information and specifications are subject to change
without notice. Please confirm at time of order
Les données et caractéristiques techniques sont
susceptibles d'être modifiées sans préavis. Veuillez
confirmer au moment de la commande.
Las informaciones y especificaciones están sujetas a
cambios sin previo aviso. Por favor, confirme a la vez
que realiza el pedido.
R
InterMetro Industries Corporation
Visit our Web Site / Visitez notre site Web / Visite nuestro sitio en la Web: www.metro.com
FOR
MBP
CARTS
1. Remove top from cart.
2. Loosely attach (3) machine screws and (3) rectangular cam-nuts to each
of the (2) poles as shown.
3. Slide the cam-nuts down inside the center grooves on the corner posts.
4. Set poles at desired height
and tighten the machine
screws.
5. Replace top.
6. Attach shelf supports and
hanger rails as shown below.
Tighten the set screws to
secure them at desired
heights.
7. Attach shelves to shelf
supports with (4) screws and
install mats.
8. Attach tilt-out bins with (2)
machine screws and (2) hex
nuts each.
OVERBRIDGE
HANGER RAIL
TILT-OUT BIN
MBP505, MBP506, MBP515, MBP520
MBP550
MBP551
MBP543, MBP544
MBP545, MBP546
MBP505
MBP506
MBP511
MBP512
set screw
cam-nut
center groove
shelf support
mat
MBP515
MBP520
MBP543
MBP544
MBP545
MBP546
MBP550
MPA568
MBA568
OVERBRIDGE BRACKET
optional clamp
(for more clamping area)
Note: MBP551 includes hooks
OVER-
BRIDGE
with
THREE
HANGER
RAILS
MBP511, MBP512
