Chapter 1 — Use the IP30
6
IP30 Handheld RFID Reader User Guide
Use the Battery
The IP30 uses the Model AB3 or Model AB19 batteries as a main
power source.
Dispose of used batteries promptly. Keep away from children. Contact
your local sales representative for replacement batteries.
Charge, Install, and Remove the Battery
To charge the IP30 battery you need a power supply, a country specific
power cord, and one of the following chargers or accessories:
•
AC6 2-Bay Charger
•
AC7 4-Bay Charger
•
AC20 Quad Charger with IP30 Battery Pack Adapter
•
AD20 Single Charger with IP30 Battery Pack Adapter
The IP30 does not ship with these accessories. For more information
on these accessories, contact your local sales representative.
IP30 USB Adapter Port Descriptions
Port
Description
Power
Connect a power supply to the CK61 to power and charge the
CK61. The IP30 does not ship with a power supply. For more
information, contact your local sales representative.
Note:
Connecting a power supply to the CK61 does not charge
the IP30. To charge the IP30 battery, see the next section.
COM 1
Connect other RS-232 devices, such as printers to the CK61.
You must use the Model AB19 battery with the IP30NI.
The battery used in this device may present a fire or chemical
burn hazard if it is mistreated. Do not disassemble it, heat it,
above 100 °C (212 °F), or incinerate it.
