Chapter 1 — Using the Vehicle Mount Computer
CV41C Vehicle Mount Computer User Guide
9
To set the battery power scheme:
1
Tap
Start
>
Settings
>
Control Panel
. The Control Panel Screen
appears.
2
Tap
Power
. The Power Properties screen appears.
3
Tap the
Schemes
tab.
4
In the Power Scheme drop-down menu, select
Battery Power
.
5
Adjust the
User Idle
,
System Idle
, and
Suspend
times by selecting
the desired times in the drop-down menus.
6
Tap
OK
when you are finished to save your changes and exit the
Power Properties screen.
About the Backup Battery
The CV41C has a permanent Lithium-Ion battery installed to
maintain the time, date, and CMOS setup information for a minimum
of 90 days. The Lithium-Ion battery is not user-replaceable and should
last five years before it needs replacement.
The backup battery must only be changed by authorized service
personnel. For more information, contact your local Intermec service
representative.
Installing an SD Card
You can use an SD card to increase file storage and install software.
The computer supports an optional 32 GB maximum capacity SD
card.
To install an SD card on the CV41C:
1
Remove the CV41C from the smart dock.
2
Press the
Power
button to place the CV41C in Suspend mode.
3
Using a small Phillips screwdriver, remove the two screws that
secure the SD card access panel.
