PE SERIES POOL/SPA
EQUIPMENT CONTROLS
INSTALLATION
OPERATION &
SERVICE MANUAL
Model: PE25300
CONTROL PANEL WITH DIGITAL TIME CLOCK FOR INDOOR/OUTDOOR USE
Suitable for Pool Equipment Control and for Direct Connection of Underwater Lights
ELECTRICAL RATINGS:
PANEL: 60 AMP/75˚C MAX. 120/240V OR 120/208V SINGLE PHASE (THREE WIRE) A.C.
Digital Time Clock: See Rating Inside Enclosure Door
The short circuit current rating of this panel board is 10,000 symmetrical amperes.
Many of today’s energy efficient pools and spas
utilize the advantages of a single electrical panel,
containing all the necessary controls for the safe,
efficient and automatic operation of the pool/spa
equipment. In addition, this panel can also be
used to control any outdoor equipment, sign or
pump within its rated capacity.
The all-weather enclosure contains a heavy-duty,
industrial grade Digital Time Clock and a
breaker base for up to four full size circuit
breakers. Also, it has provisions to install
switches or a GFCI receptacle on the side as
well as the inside.
The Digital Time Clock is designed to operate
any pump, within its rated capacity. However, if
protection to prevent dry start is required by the
pump manufacturer, it must be provided in
addition to this Control. Contact pump
manufacturer if not sure and/or for more details.
1
DANGER! TO AVOID RISK OF INJURY:
...do not permit children to operate the Control Unit or use the Pool/Spa unless they are closely supervised at all times.
...test GROUND FAULT protection regularly. If it fails to reset, DO NOT USE THE POOL or SPA!
Contact a qualified service technician.
...always disconnect electricity before servicing this control or the equipment connected to it.
READ, FOLLOW AND SAVE THIS INSTRUCTION MANUAL
GENERAL INFORMATION
