manualshive.com logo in svg

Intermatic IG2TM, Installation Instructions

Share
Download
Intermatic IG2TM Installation Instructions Download Page 4

I

NTERMATIC

I

NCORPORATED

Spring Grove, Illinois 60081

http://www.intermatic.com

158IG12080

4.46” ( 29/64 )

6.60” ( 19/32 )

5/16”

5/16”

5/16”

5/16”

CUT OUT AREA

INSIDE OF 

DASHED LINE

FLUSH MOUNT COVER PLATE 

Model Number IGFLUSH 

(ordered separately)

INSTALLATION NOTES:
This plate may be installed in the Vertical or Horizontal position. Position this template over the
surface and mark the cut-out area through the template. Carefully cut out the marked area.

CUTTING TEMPLATE

Summary of Contents for IG2TM

Page 1: ...phone line protection module Models SURGE PROTECTION Description Quantity Reference Mounting Frame 1 A Cover Back plate 1 B IG2T in Model IG2TM 1 C IG2T 2nd module in Model IG4TM 1 D Screws self threading 3 8 Torx T20 slot head 2 E Ground Wire 1 F 3 4 x 6 Pan Head Screws not shown 4 3 4 anchors not shown 4 Description Quantity Reference Flush Mount Cover Plate 1 H Mounting Bracket 1 J Screws self ...

Page 2: ...s properly connected to the building ground Use at least 12 gauge wire if additional length is required A5 Allow approximately four inches 4 of phone cable for each connection set Leave enough slack in the cable to allow it to be secured to the Mounting Frame without placing stress on the wires and terminals Route the incom ing phone cable unprotected to the top of the unit note the IN on the phon...

Page 3: ...aution when removing the jacket to prevent nicking the individual wires B7 Identify the pairs of wires to be protected and strip one quarter inch 1 4 of insulation from each wire in both the IN and OUT phone wires Exercise caution when removing the insulation to prevent nicking the individual wires B8 Insert the first pair of wires into the first two positions in terminal strip marked CN1 located ...

Page 4: ... 16 CUT OUT AREA INSIDE OF DASHED LINE FLUSH MOUNT COVER PLATE Model Number IGFLUSH ordered separately INSTALLATION NOTES This plate may be installed in the Vertical or Horizontal position Position this template over the surface and mark the cut out area through the template Carefully cut out the marked area CUTTING TEMPLATE ...

Reviews:

No comments

Brands by name

Popular brands

Load more brands