Intermate Twinax Connection LX T-04, User Manual

Page: 66 / 81

A p p e n d i c e s
66 U s e r ‘ s G u i d e
Euro Support via Terminal Configuration
The Euro symbol is contained in the ASCII character set “PC-858". This is also
the default character set for the firmware release K12-8491. Euro Support is
disabled by selecting an ASCII character set other than “PC-858" for the
current printer driver.
Printer driver ASCII character set (with
Euro Support - default) ASCII character set
(without Euro Support)
IBM Proprinter
PC-858 PC-850
Epson FX/EX/DFX
PC-858 PC-850
Epson LQ PC-858 PC-850
If you are unsure whether your LX T-04 firmware is equal to or greater than
K12-8491, you should make a test printout. This is done by turning the printer
Off, setting the LX T-04's address switch to position "9" and turning the printer
On.
The Intermate LX T-04 version number is printed at the top of the printout.
This should be K12-8491 or greater. The last four digits represent the firmware
revision number. The higher this number is, the newer is the firmware.
Contact your dealer if the firmware needs upgrading. Alternatively, a zipped
file containing the firmware can be downloaded from the Intermate web site
(
www.intermate.com ). Search for "K12" in the Support section's Download
section. Download the file called K12-xxxx.zip. You will need a decompressing
tool like WinZip
®
to extract the file.
Refer to appendix D. Updating the Software on page 61 for details on how to
update the firmware.
How to disable Euro support
This procedure requires that the LX T-04 has been updated with the firmware
K12-8491 or greater.
1. Switch Off the printer and disconnect it from the network.