20
P/N 466-5227
• REVA • ISS 26AUG15
ZeroWire Reference Guide
©2015 United Technologies Corporation
2.2 Option 1 - Ethernet Setup
Connect power to your ZeroWire.
If this ZeroWire was previously connected via Wi Fi, switch connection to Ethernet:
Connect an Ethernet cable to the rear of the ZeroWire and wait 10 sec for the local router to
assign the ZeroWire an IP address.
On the ZeroWire press
Menu
– 8 – [PIN] – 6
and note the IP address announced. This is the
IP address of your ZeroWire. If yo
u hear “IP address is not configured” then wait a further 30s
and repeat this step.
Open your web browser.
Enter
IP address
. The ZeroWire login screen should appear:
Enter your username and password. By default this is:
installer
and
9
-
7
-
1
-
3
.
You should now see a screen similar to one of the below:
Your ZeroWire is now successfully connected to your Ethernet network.
Press
Settings
or Advanced to program your ZeroWire.
To internet
Router