Interlogix WMC252-1W-1T-300, User Manual, Page: 49 / 93

-49-
5.1.10 WAN Port Settings
Click “ Operation Mode ”

“ AP Router ” or “ Wireless ISP ” and then enter the “ WAN Port Settings ” by clicking
the Setup button next to it. This section allows you to configure the internet connection settings.

DHCP (Auto Config)
Choose “ DHCP ” and the router will automatically obtain IP addresses, subnet masks and gateway addresses
from your ISP.
Figure 5-20 WAN Port Settings – DHCP

Static Mode (Fixed IP)
If your ISP offers you static IP Internet connection type, select “ Static Mode " and then enter IP address, subnet
mask, primary DNS and secondary DNS information provided by your ISP in the corresponding fields.
Figure 5-21 WAN Port Settings – Static IP
Object Description
•
IP Address
Assigned by
Your ISP
Enter the WAN IP address provided by your ISP. Enquire your ISP if you
are not clear.
•
IP Subnet Mask
Enter WAN Subnet Mask provided by your ISP.
•
ISP Gateway IP
Address
Enter the WAN Gateway address provided by your ISP.