2 / 2
P/N 1072548C-EN • REV 1.0 • ISS 27JUL12
Retighten the terminal screws until snug, ensuring that the power
leads are secure. Supply power to the unit by plugging the power
supply into a proper source.
Note
: The power LED illuminates to show that the camera is
receiving power. If it does not illuminate, check the terminal block
connections and the power source
For UVC-6130-1-P2:
Connect the power cable of a high voltage camera to either a 230
VAC or a 120 VAC power supply outlet.
Programming
Once the camera hardware has been installed, the camera can then
be configured. Program the camera by attaching a standard video
monitor to the system.
OSD control pad
The on-screen display (OSD) control pad (see Figure 1/Figure 2) is a
five-direction button that lets you manually control the camera
functions. Table 1 below lists the OSD control pad functions and
describes their use.
Table 1 Description of the OSD control pad
Pad direction
Description
Up
Moves the cursor upward to select an item
Left
Moves the cursor left to select or adjust the options
of the selected item.
Right
Moves the cursor to the right to select or adjust the
options of the selected item.
Down
Moves the cursor downward to select an item.
Enter
Press the center of the control pad to display the
Setup menu. If the selected item has its own menu,
press the control pad to enter a submenu.
Accessing the menus
Press
Enter
on the camera’s OSD control pad to display the Setup
menu (see Figure 4 below). The Setup menu provides access to the
camera configuration options (Figure 5). The OSD is only available in
English.
Figure 4: Setup menu screen
Table 2: Setup menu description
Menu item
Description
Lens
Defines the lens type as manual or autoiris.
Shutter/AGC
Defines the method of light control.
Pict Adjust
Defines the image quality functions.
White Bal
Defines the white balance (WB) set up.
WDR
Defines the wide dynamic range (WDR) set up.
NR
Defines the digital noise reduction level.
BLC/HLC
Defines the highlight compensation (HLC) and
backlight compensation (BLC) set up.
Day/Night
Defines the day/night (D/N) set up.
EZoom
Enables/disables digital zoom.
DIS
Enables/disables the digital image stabilizer.
Privacy
Defines privacy mask set up.
Menu item
Description
Motion Det
Defines the motion detection set up.
Sync
Displays the current synchronization mode.
Camera ID
Defines the camera ID displayed on-screen.
Language
Defines the language of the OSD.
Camera Reset
Resets the camera to factory default settings.
Save All
Saves all configuration changes made.
Exit
Exits the menu and returns to live mode. Saves
changes made.
Specifications
Model UVC-6130-1-N(P)
UVC-6130-1-P2
Lens type
C/CS-DC drive
Power supply
24 VAC / 12 VDC
96 to 240 VAC
Current
300 mA
Max. 50 mA
Power consumption
Max. 3.6 W
Max. 4.8 W
Operating temperature
-10 to +50 °C (14 to 122 °F)
Weight
390 g (0.85 lbs)
Menu map
Figure 5: Menu map
