3
Preliminary 1/22/02
instructions or reference manual for complete programming
details.
1.
Set the panel to program mode.
2.
Proceed to the LEARN SENSORS menu.
3.
Select the appropriate zone type and zone number
assignments.
4.
Set the external switch in the alarm condition (open for
a normally closed circuit, closed for a normally open
circuit).
5.
Trip the sensors tamper switch by removing the sensor
cover.
6.
Exit program mode.
7.
Place the cover back on the sensor.
Testing
The following steps describe the general guidelines for test-
ing the sensor. Refer to the specific panel installation
instructions or reference manual and the instructions for the
external switch for complete testing details.
1.
Set the panel to the installer zone test mode.
2.
Trip the sensor.
3.
The signal strength from the UFT will be displayed on
all keypads. It should be 15 or higher for proper opera-
tion.
Specifications
Operating Temperature
Range: ........................... 10° to 120° F
Compatibility: ............... Advent Commercial Fire 250 Zone
(60-562-03)
Advent Commercial Fire 132 Zone
(60-562-06)
Advent Commercial Burg 250
Zone (60-562-01)
Advent Commercial Burg 132
Zone (60-562-04)
Power Source: ............... 1 AA 3.6-volt lithium battery (not
replaceable)
Transmit Range: ............ At least 500 feet, open air
