Self-test function
TX-2810-01-4 has a self-test facility which sends a tamper
signal if a fault is detected. If a fault has been detected,
removing the front cover triggers the detection LED to flash
10 times.
Walk test
In walk test mode, the detection LED option is set to ON. The
detection LED lights each time TX-2810-01-4 detects your
presence.
To enter the walk test mode, press the programming button
once. The unit can then be aligned. The detection LED lights
on TX-2810-01-4 every time detection takes place.
The test mode ends automatically five minutes after last
detection.
Note:
When you conduct a walk test, make sure that the front
cover is in place. Do not conduct walk tests with the cover
removed.
The range of the detector increases without the protective front
cover. Therefore the front cover must be fitted to establish the
correct beam pattern. Use Table 2 on page 6 to adjust the
range as necessary. Pan and tilt the lens module over the field
of view to obtain the correct coverage area.
Specifications
Detection range
Programmable: 10 m / 30 ft., 20 m / 66 ft., or
30 m / 98 ft.
Coverage
10 to 70° detection angle, 30 x 24 m /
98 x 79 ft. coverage max.
Adjustment
180° pan, 90° tilt
Fresnel lens
28 zones for each detection element, which
can be masked with the curtain sliders
Customized optics
Double silicon shielded quad element
eliminates 50,000 lux of white light
LED
Detector alarm / Programming
Batteries
2X 3 V CR123 (3 years)*
3X 3 V CR123 (up to 5 years)*
Current
50 µA
Pulse count
1 or 2
Temperature
compensation
Analogue (thermistor) and digital sensitivity
adjustment
Control
Digital microprocessor with non-volatile
memory
Walk test
Output test mode with LED indication.
Operating temperature
−
25 to +65°C /
−
13 to 149°F
Housing
High impact ABS plastic with HDPE cover,
UV stabilized
Dimensions, W x H x D
125 x 175 x 130 mm / 4.92 x 6.89 x 5.12 in.
Weight
334 g net, 555 g gross / 11.77 oz net,
19.68 oz gross
Mounting height
Variable up to 6 m / 20 ft.
Optimum height 3 m / 10 ft. for full range
*
Under normal operations
Regulatory information
Manufacturer
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Rd., Arden Hills, MN 55112-6943,
USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Certification
FCC compliance FCC ID: B4Z-779EPIR
This device complies with FCC rules Part 15.
Operation is subject to the following two conditions
(1) This device may not cause harmful interference
and (2) This device must accept any interference
that may be received including interference that
may cause undesired operations.
IC compliance
IC ID: 1175C-779EPIR
This Class B digital apparatus complies with
Canadian ICES-003.
Cet apparell numérique de la classe B est conforme
à la norme NMB-003 du Canada.
1999/5/EC (R&TTE directive): Hereby, UTC Fire &
Security declares that this device is in compliance
with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Environmental
class
IP65
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For
more information see: www.recyclethis.info.
Contact information
www.utcfireandsecurity.com or www.interlogix.com.
For customer support, see www.interlogix.com/customer-
support.
FR: Fiche d'installation
Emballage
L'emballage contient :
•
1 TX-2810-01-4
•
1 gabarit de perçage pour les trous de fixation
•
2X batteries lithium 3 V CR123
•
2 chevilles de 31,75 mm
•
2 vis de 31,75 mm
•
1 masque de lentille
•
2 obturateurs à rideaux supplémentaires
•
1 calotte d'autoprotection
•
2 couvercles d'autoprotection (différentes longueurs)
•
1 outil de verrouillage en plastique
•
1 fiche d'installation
•
1 bouchon fileté de couvercle avant
P/N 1079515 (ML) • REV B • ISS 23JAN13
7 / 12
