14
Installation Guide
Note:
Please do not remove the foam ring
attached to the lens. This foam ring is required
to reduce the
glare of IR illuminators.
7. Tighten the Philips screw and re-install the
housing cover to the camera assembly using
the Torx wrench.
Program
In HD-TVI or A
nalog mode, use the OSD (On
Screen Display) button to program the camera. The
button is located on the cable harness. In HD-TVI
mode, the OSD men
u can also be accessed via the
TVI recorder.
Summary of Contents for TVW-6101
Page 2: ......
Page 7: ...Installation Guide 5 Equipment disposal sheet...
