16
Installation Guide
If installing the turret camera to a wall mount or other
accessory, an adapter plate is provided. Install the
adapter plate to the accessory with three PM4X8 screws
,
referencing number “2”.
2.
Rotate the trim ring counterclock
wise to remove it from
the camera.
3.
Route the cables directly out of the
base of the camera.
4. Install the camera on the mounting surface using the
supplied hardware.
5. Connect the corresponding power and network cables.
6.
Adjust the lens.
a) Loosen the locking screw using a Philips screw
driver.
Summary of Contents for TVB-5501
Page 1: ...TruVision Series 5 IP Camera Installation Guide P N 1073339 EN REV B ISS 13SEP17...
Page 30: ......
Page 31: ......
Page 32: ......
