Chapter 13: Alarm and event setup
TruVision DVR 44HD User Manual
97
5. Set the arming schedule for detecting video loss.
Click the
Actions
tab and select the schedule of when you want video loss detection to be
enabled. The schedule can be set for all week or any day of the week with up to 8 time
periods per day. Click
Apply
to save the settings.
6. Select the alarm response method.
Click the
Arming Schedule
tab and select how you want the recorder to notify you of video
loss. Select: Full-screen monitoring, enable alarm host, send email, and trigger alarm host.
See page ““Types of system alarm notifications” on page 96 for the descriptions. Click
Apply
to save the settings.
7. Click
OK
to return to the main window
8. Click
Copy
to copy these settings to other cameras, if required, and then click
Apply
to
save the changes.
9. Click
Exit
to return to live view.
Alarm host setup
If an alarm host is set, the recorder sends a signal to the host when an alarm is triggered. The
alarm host must have the TruVision Navigator server software installed.
To set up an alarm host:
1. From the menu toolbar, click
Alarm & Event Setup
>
Alarm Host Setup
.
2. Enter Alarm Host IP and Alarm Host Port values.
Alarm host IP represents the IP of the remote PC where the Network Video Surveillance
software installed. The alarm host port value must be the same as software’s alarm monitor
port. Up to three alarm hosts can be set. For each alarm host, the default port is 5001,
5002, and 5003.
3. Click
Apply
to save the settings.
4. Click
Exit
to return to live view.
Summary of Contents for TruVision DVR 44HD
Page 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Page 174: ......
