![background image](http://html1.mh-extra.com/html/interlogix/truvision-4-series/truvision-4-series_installation-manual_2077152019.webp)
Installation Guide
13
Note:
1. To reset the camera to default settings, press and hold
the RESET button and power on the camera. After the
camera is started up, please
hold the Reset button for
an
additional 20 seconds.
2. The type of auto-iris interface is shown below:
No.
DC-driven
1
Damp-
2
Damp+
3
Drive+
4
Drive-
Power, Video and GND pins are used when the auto-iris
is driven by video. Damp+, Damp-, Drive+ and Drive-
pins are used when the auto-iris is driven by DC.
Summary of Contents for TruVision 4 Series
