interlogix truVision DVR 11c © 2014 I-View Now, LLC. All Rights Reserved.
Page 5
Installation Worksheet
The I-View Now Portal Installation Worksheet is created after entering the DVR make and model into the system. A
portion of an example worksheet is printed below. This sheet should be generated from the system before attempting
to set up the site for integration with I-View as it enables setup of the DVR onsite login and password as well as the
means to send SMTP messages back to the I-View Now server. There is a place on the form for recording the Location IP
Address which is the external IP address used for the router at the site facing the Internet. In addition the ports on the
external router that will be forwarded to the DVR should be noted on this form. This information needs to be input into
the i-viewnow.com system so it will know the external IP address and ports used to communicate from the site through
the router at the site and onto the DVR.
Figure 2
Retrieve the IP address by asking the Customer/IT department for the IP address, or visit http://whatismyip.org while
on-site for a possible correct address; however, verify with the IT department that the IP address discovered is valid to
use as a target from the I-View servers. The IT Site Administration must enable port forwarding from their
router/firewalls to the Speco DS 16 DVR port address.