© 2016 UTC Fire & Security Americas Corporation, Inc.
1 / 2
P/N 422-5828 • REV E • ISS 30DEC16
RF-KF101-K4 4-Button Chrome Wireless Keyfob
Installation Sheet
EN
1
2
4
3
EN: Installation Sheet
Enrolling
Each keyfob is learned in to a control panel as an
unsupervised sensor and uses one available zone slot. For
80+ receivers like ZeroWire, learn-in the device by pressing the
“lock” and “2” buttons simultaneously. Please refer to your
specific control panel installation manual for full instructions.
Operation
Arm - Lock
Press once for Arm-Away mode.
Disarm - Unlock
Press this button to disarm your system. You do not have to
enter your access code when you use this key to disarm the
system.
Press once for Arm-Stay mode, twice for Stay Instant mode,
three times for Stay Night mode.
This button's function depends on the individual panel
programming. Refer to the installation instructions for your
panel.
Panic and Aux
If the keyfob is programmed using a panic group number,
pressing the buttons and simultaneously will activate an
audible or silent panic alarm (depending on a group number)
and initiate reports to the central station.
Similarly, if the keyfob is programmed using a portable
auxiliary group number, pressing the buttons
and
simultaneously will activate an audible or silent auxiliary alarm
(depending on a group number) and initiate reports to the
central station.
LED indications
Every event sent from the keyfob to the panel is signaled with
a single flash of the green LED.
