P/N 1073228
• REV
A
• ISS 09SEP16
3 / 4
Figure 2: Connecting architecture with IEEE 802.3at/802.3af
devices
O
nce
POE303
-
MS
detects the existence of an IEEE
802.3at/802.3af
device, the
PoE In-use
LED indicator
will be steadily on
to show it is providing power.
Note
:
1.
Since the PoE port
of POE303
-
MS supports 52
-
56V
DC
PoE power output, please check and assure the
p
owered
device (PD) accept
s
DC power range of
52
-
56V DC.
Otherwise, it will damage the
p
owered device (PD).
2.
If the connected device is not fully complied
with IEEE
802.3at/802.3af Power over Ethernet or in
-
line power
device, the LED indicator of POE303
-
MS
will not be on
steadily
.
The POE303-MS installation with multiple extenders.
Figure 3: Connecting architecture with IEEE 802.3at/802.3af
devices
Note
: The
POE303
-
MS
can be installed in a pair. However, the
use of third
-
party device is allowed if the device complie
s
with
IEEE 802.3a
t
Power over Ethernet
.
Do Not Connect any PSE devices into the output Ports of the
Injector, as it may cause damage to the unit.
Regulatory information
Copyright
©
2016
United Technologies Corporation.
Interlogix is part of UTC Climate, Controls &
Security, a unit of United Technologies
Corporation.
All rights reserved.
Manufacturer
Interlogix
.
2955 Red Hill Avenue, Costa Mesa, CA 92626
5923, USA
Authorized EU manufacturing representative:
UTC Fire & Security
B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
FCC compliance
Class A: This equipment has been tested and
found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
FCC conditions
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference.
(2) This Device must accept any interference
received, including interference that may cause
undesired operation.
ACMA
compliance
Notice! This is a Class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
Canada
This Class A digital apparatus complies with CAN
ICES
-
003 (A)/NMB
-
3 (A).
Cet appareil numérique de la classe A est
conforme à la norme CAN ICES
-
003 (A)/NMB
-3
(A).
Certification
European Union
directives
12004/108/EC (EMC directive): Hereby, UTC Fire
& Security declares that this device is in
compliance with the essential requirements and
other relevant provisions of Directive
2004/108/EC.
2012/
19/EU
(WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at
designated
collection points. For more information see:
www.recyclethis.info.
