NX-181xx NetworX Voice keypad with touch buttons Installation Manual
13
Panel and Device Configuration
Step
Advanced system configuration – Panel and device configuration
1.
[MENU]-[0]
Selects main menu - Option 0, Advanced system configuration.
Enter your code, touch menu to exit.
2. [?]-[?]-[?]-[?]
Enter
your
4 or 6 digit Programming code.
Touch one for keypad configuration, touch two for panel and device
configuration, touch three to configure service provider phone number,
touch menu to exit.
3.
[2]
Selects Panel and device configuration.
Select a device number followed by enter, touch menu to go back.
4.
[ ? ]
[ENTER]
Select the device you wish to program.
Selected device? is connected, select a feature number followed by
enter, touch menu to go back.
5.
[MENU]
Moves back to step 4, select a device number.
6. [MENU]
Moves back to step 3, Advanced system configuration
selection.
7.
[MENU]
Exits from Advanced system configuration.
When in device programming:
Feature number then [ENTER], to move to the feature you wish to program.
Touch [MENU] to accept changes and move to the next segment.
Touch [ENTER] to exit the feature.
Touch [MENU] three times to exit device programming.
