12
NX-1815E NetworX Voice Keypad with 16 zone LEDs User Manual
5.
[MENU]
Press menu to exit.
Control The Zone Chime
Menu 2
You can setup your NX-1815E so that it will
beep
when selected zones are
tripped or activated, this is called chime. Chime mode does not trigger any
alarms, and it is only used as a low level alert such as a customer entry door.
You can add and delete zones from the
chime group
offering a very flexible
chime mode feature. The zones you have selected to be in the
chime group
are
stored in memory and are not cleared when the security system is armed and
disarmed.
How to: Control chime mode
Step Example:
Turning On / Off Chime Mode
1.
[MENU] - [2]
Selects main menu - Option 2, Chime Mode.
2.
[0]
Toggles chime mode On / Off.
3.
[MENU]
Exits back to main menu.
4.
[MENU]
Press menu to exit.
How to: Add a zone to the chime group
Step Example:
Adding zone 4 chime group
1.
[MENU] - [2]
Selects main menu - Option 2, Chime Mode.
2.
[4] - [ENTER]
Selects zone 4.
3.
[0]
Set / Unset chime to this zone and adds it to the chime group.
4.
[MENU]
Exits back to main menu.
5.
[MENU]
Press menu to exit.
System Event History
Menu 3
Menu 3
-
System Event History
1 Last alarm memory
2 Event history
The Event History menu is used to listen to the last 185 events that occurred in
your security system. These events are held within your security systems
memory, and include events such as, arming, disarming, system faults and
alarmed zones. All events are time date stamped so ensure your clock is set
correctly in menu 9. Alarm memory is a quick recall of the last zone(s) that
caused your security system to go into alarm condition.
www.msealarms.com.au
