background image

 

 

 

Copyright 

© 2016 United Technologies Corporation,   
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies 

Corporation.    All rights reserved. 
 

Trademarks 

and patents 

Trade names used in this document may be trademarks or registered trademarks of the 

manufacturers or vendors of the respective products. 
 

Manufacturer 

Interlogix 

2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA 
Authorized EU manufacturing representative: 

UTC Fire & Security B.V. 

Kelvinstraat 7, 6003 DH Weert, The Netherlands 
 

Certification 

 

  

 

 

 

FCC 

compliance 

Class A: 

This equipment has been tested and found to comply with the limits for a Class A 

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in a 

commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instruction manual, 

may cause harmful interference to radio communications. Operation of this equipment in a 

residential area is likely to cause harmful interference in which case the user will be 

required to correct the interference at his own expense. 
 

FCC 

conditions 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions:   
(1) This device may not cause harmful interference. 
(2) This Device must accept any interference received, including interference that may 

cause undesired operation. 
 

ACMA 

compliance 

Notice! 

This is a Class A product. In a domestic environment this product may cause radio 

interference in which case the user may be required to take adequate measures. 

Canada 

This Class A digital apparatus complies with CAN ICES-003 (A)/NMB-3 (A).   
Cet appareil numérique de la classe A est conforme à la norme CAN ICES-003 (A)/NMB-3 

(A). 
 

European 

Union 

directives 

This product and - if applicable - the supplied accessories too are marked with "CE" and 

comply therefore with the applicable harmonized European standards listed under the 

EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 
 

 

2012/19/EU (WEEE directive): 

Products marked with this symbol cannot be disposed of 

as unsorted municipal waste in the European Union. For proper recycling, return this 

product to your local supplier upon the purchase of equivalent new equipment, or dispose 

of it at designated collection points. For more information see: www.recyclethis.info.

 

 

2013/56/EU (battery directive): 

This product contains a battery that cannot be disposed 

of as unsorted municipal waste in the European Union. See the product documentation for 

specific battery information. The battery is marked with this symbol, which may include 

lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return 

the battery to your supplier or to a designated collection point. For more information 

see: 

www.recyclethis.info

 

Contact 

information   

For contact information, see www.interlogix.com or www.utcfssecurityproducts.eu. 

 

 
 
 
 
 
 
 
 
 

 

 

Summary of Contents for NS3502-8P-2T-2S












Reviews: