© 2016 United Technologies Corporation.
P/N 1073226 • REV A • ISS 13SEP16
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved.
8-Port 10/100/1000Mbps Industrial Gigabit
Ethernet Switch - NS3050-8P - User Manual
Package Contents
Thank you for purchasing IFS 8-Port 10/100/1000T industrial
Gigabit Ethernet Switch, NS3050-8T. In the following section,
the term “
Industrial Gigabit Ethernet Switch
” means the
NS3050-8T.
Open the box of the Industrial Gigabit Ethernet Switch and
carefully unpack it. The box should contain the following items:
Industrial Gigabit Ethernet
Switch x 1
User's Manual x 1
DIN Rail Kit x 1
Wall-mount Kit x 1
If any of these are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the
original packing material, and use them again to repack the
product in case there is a need to return it to us for repair.
2. Hardware Introduction
2.1 Physical Dimensions
NS3050-8T dimensions (W x D x H): 135 x 87 x 32mm
See Figure 2.1 on page 6.
2.2 Switch Front Panel
The front panel of the Industrial Gigabit Ethernet Switch
consists of 5 or 8 auto-sensing 10/100/1000Mbps Ethernet
RJ45 ports. The LED Indicators are also located on the RJ45
ports of the Gigabit Ethernet Switch.
Figures 2-2 show the front panels of Industrial Gigabit Ethernet
Switches.
Figure 2-2: NS3050-8T Front Panel
2.3 LED Indicators
LED
Color
Function
P1
Green
Lit
: indicates power 1 has power.
P2
Green
Lit
: indicates power 2 has power.
FAULT
Red
Lit: indicates either power 1 or power 2 has no
power.
(See Note: 1)
1000
Green
Lit
: indicates the port is successfully
connecting to the network at 1000Mbps.
Off: indicates that the port is successfully
connecting to the network at 10Mbps or
100Mbps.
Blinking
: indicates that the port is actively
sending or receiving data.
100
Orange
Lit
: indicates the port is successfully
connecting to the network at 100Mbps or
10Mbps.
Off
: indicates that the port is successfully
connecting to the network at 1000Mbps.
Blinking: indicates that the port is actively
sending or receiving data.
(Note: 1) Notice the fault light will go out if you tie power 1 to
power 2 if you are not using redundant power.
