![background image](http://html1.mh-extra.com/html/interlogix/mobileview-mvc-7100-29-bl/mobileview-mvc-7100-29-bl_installation-manual_2077135004.webp)
4
Mini-Dome Camera Installation Manual
Troubleshooting
There is no image or it is intermittent.
Check video cable connections. The BNC connector
may be shorted or the wires pinched.
Ensure that the BNC connector inside the connection
box is wrapped with electrical tape to prevent metal-
to-metal contact with the camera housing.
Ensure that the pigtail wires coming from the camera
are not pinched.
Image is upside down or misaligned on the
monitor.
The camera is not properly aligned. Adjust the
camera for the correct view.
FCC Compliance
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
installation instructions, may cause harmful
interference to radio communications.
You are cautioned that any changes or modifications
not expressly approved by the party responsible for
compliance could void the use
r’s authority to operate
the equipment.
Contact information
North America:
855-MOBVIEW (662-8439)
Latin America:
561-998-6114
Web site:
www.interlogix.com/mobileview