background image

Description 

The IS-ZW-TSTAT-300 programmable communicating thermostat operates via a 

high-quality, easy-to-use touch screen. To program or adjust your thermostat, 

simply touch your finger firmly to the screen. The screen will automatically light 

up and you will hear a “beep”. The screen will respond differently to different 

types of touches, so you may want to experiment by touching it different ways, 

finger, fingernail, etc. Do not use a sharp or metallic device; it will scratch the 

screen. 

Figure 1: IS-ZW-TSTAT-300 

LINK

RADIO

TA

RGET

TEMP

Top cover

Bottom cover

Wire terminals

MODE button

FAN button

Menu button

Prog button

Reset button

HVAC switches

Save Energy

           button

Power grid

       status

   indicator

Touch screen

 

Control screens 

Before you operate the thermostat, you should get familiar with these basic 

control screens. All the thermostat functions are accessed through these 

screens: Home, Menu, Program, and Manual. The touch screen technology 

allows you to select (by touching) an item and change it using the +/- arrows or 

the time arrows. 

IS-ZW-TSTAT-300 Advanced Thermostat Operation Guide 

Summary of Contents for IS-ZW-TSTAT-300













Reviews: