IFS POE302-SP Ethernet Splitter User Manual 5
Figure 3: Connection Schematic
WARNING:
The POE302-SP only accepts IEEE 802.3at
equipment; other in-line power device may cause the POE302-
SP malfunction.
2. Connect the UTP cable in the package from "Ethernet” port
of POE302-SP to the RJ-45 port of remote device.
3. Adjust proper DC power output and connect DC plug from
"DC OUT" of POE302-SP to remote device.
Caution:
Please ensure the output voltage is correct for
remote device. Otherwise, it will damage your remote device.
4. Power on the remote device and its LED indicator will
remains on.
Connecting with other 802.3at Devices
The POE302-SP also provide the alternative to make the non
IEEE 802.3at devices the possibility to connect with an IEEE
802.3at in-line power device like Power over Ethernet Injector
or Power over Ethernet Switch, the figure is as below.
Summary of Contents for IFS POE302-SP
Page 1: ...IFS POE302 SP Ethernet Splitter User Manual P N 1076527 REV A ISS 08FEB12...
Page 4: ......
Page 6: ......
