IFS MCR200-1T-1TW User Guide 13
Figure 3
: MCR200-1T-1TW LAN to LAN connection
Connecting the MCR200-1T-1TW
Connecting Standalone PC
Refer to the following procedures to setup the MCR200-1T-1TW to a
standalone PC.
1.
Set the MCR200-1T-1TW to be CO or CPE mode from the DIP switch at
the rear panel.
2.
Power on the MCR200-1T-1TW by connecting its power source.
3.
Power LED will illuminate.
Connect VDSL line from another VDSL device to VDSL port of
4. The
MCR200-1T-1TW.
5.
LNK LED will blink to illuminate.
6.
Connect telephone to the PHONE port.
7.
Connect Ethernet port to PC Network Interface Card (NIC) via regular Cat.
5, 5e or 6 cable.
Figure 3-4
: Connecting Standalone PC
