2
IFS ANT-UNI-21DB-2G Quick Start Guide
Use approved non-conducting lasers and other safety
equipment. Make sure all equipment is in good repair.
If a tower or mast begins falling, don’t attempt to catch it.
Stand back and let it fall.
If anything such as a wire or mast does come in contact
with a power line,
DON’T TOUCH IT OR ATTEMPT TO MOVE
IT.
Instead, save your life by calling the power company.
Don’t attempt to erect antennas or towers on windy days.
MAKE SURE ALL TOWERS AND MASTS ARE
SECURELY GROUNDED, AND ELECTRICAL
CABLES CONNECTED TO ANTENNAS HAVE
LIGHTNING ARRESTORS.
This will help prevent fire damage or human injury in case of
lightning, static build-up, or short circuit within equipment
connected to the antenna.
The base of the antenna mast or tower must be connected
directly to the building protective ground or to one or more
approved grounding rods, using 1 OAWG ground wire and
corrosion-resistant connectors.
Refer to the National Electrical Code for grounding details.
IF A PERSON COMES IN CONTACT WITH
ELECTRICAL POWER, AND CANNOT MOVE:
DON’T TOUCH THAT PERSON, OR YOU MAY BE
ELECTROCUTED.
Use a non-conductive dry board, stick or rope to push or
drag them so they no longer are in contact with electrical
power.
Once they are no longer contacting electrical power,
administer CPR if you are certified, and make sure that emer-
gency medical aid has been requested.
Contact information
For customer support, see
© 2015 United Technologies Corporation
Interlogix is part of UTC Climate Controls & Security, a unit of
United Technologies Corporation. All rights reserved.
