manualshive.com logo in svg

Interlogix GE-DSH-82-PoE, Installation Sheet

Share
Download
Interlogix GE-DSH-82-PoE Installation Sheet Download Page 13

Figure 13: Login screen 

 

3.  After entering the username and password, the main screen appears. 

4.  Now you can use the Web management interface to continue the Switch 

management. Please refer to the user manual for more information. 

Note: 

For security reasons, please change and memorize the new password 

after this first setup. 

Contact information 

Thank you for purchasing an IFS product. You can browse our online FAQ 
resource at the Interlogix website first to check if it could solve your issue. If 
you need more support information, please contact our Interlogix support 
team. 

888.437.3287 Toll-free in the US, Puerto Rico, and Canada. 

503.885.5700 outside of the toll-free area.

 

For contact information, see our Web site: www.interlogix.com. 

Copyright © 2011 UTC Fire & Security. 

Contents subject to change without prior notice. 

Interlogix is a registered trademark of UTC Fire & Security.  All other trademarks belong to their 

respective owners.

 

P/N 1069666-EN • REV 1.01 • ISS 14JUL10 

13 of 13 

Summary of Contents for GE-DSH-82-PoE














Reviews:

No comments

Brands by name

Popular brands

Load more brands