46
Valid values are in the range
from 0 to 255; 0 is unlimited rate.
•
Speed Base
Configure the speed limitation mode. The possible field values are:
Low
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 32Kbps (Port
1~Port 18)
High
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 256Kbps (Port
1~Port 16)
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 2048Kbps (Port
17~Port 18).
Buttons
: Click to apply changes
: Click to restore default settings
Figure 4-3-5
Ingress Bandwidth Control Status Page Screenshot
The page includes the following fields:
Object
Description
•
Port No
The switch port number of the logical port.
•
Tx Rate
Display the current Tx rate limitation.
•
Rx Rate
Display the current Rx rate limitation.
•
Link Speed
Display the current link speed information.
4.3.4 Broadcast Storm Control
This section introduces detail settings of Broadcast Storm Control function of PoE Web Smart Ethernet Switch.
There is an unknown unicast storm rate control, unknown multicast storm rate control, and a broadcast storm rate control.
These only affect flooded frames, i.e.
frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.
The
