Release Note: Interlogix. NEW Concord 5” Touchscreen with Firmware Patching Mechanism
2
©10/10/2019 United Technologies Corporation. Interlogix is part of UTC Fires & Security, a unit of United Technologies Corporation. All rights reserved.
6.
The patching process begins. Touchscreen Version 2 displays the message “Please
Wait. The panel is being patched. Progress: X%.” During the patching process the
bus interface power supply will be reset once
. (WARNING - DO NOT INTERRUPT THE
PATCHING PROCESS. ANY INTERRUPTION MAY CAUSE DAMAGE TO THE PANEL
FIRMWARE. THE PROCESS TAKES UP TO 20 SECONDS. EACH PANEL IS
PATCHED ONE TIME.)
7.
After the patching process, the Touchscreen Version 2 displays the message
“ATTENTION! Panel successfully patched. Press here to confirm.”
8.
Press the message displayed on the Touchscreen Version 2. The panel patching
process is finished.
9.
Check the panel firmware version by following the steps below:
a. Press the Gear icon in lower right hand corner of the screen and scroll down
to enter Programming: