Chapter 5: Menu reference
200
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
5.1.n.6.3.2 Door AGs
2>Door AGs
123456789012345>
Select door area groups in the same way as areas in “5.1.n.6.3.1 Door areas” on
5.1.n.6.3.3 When unset
1>Low security
No
Define the door functionality when the assigned areas are unset.
5.1.n.6.3.3.1 Low Security
1 Low security
>No<
If set to yes, the door is operating in the low security mode when all door areas
are unset, which means the user authorization is changed from Card
and
PIN to
Card
or
PIN.
5.1.n.6.3.3.2 Unlock Door
2 Unlock Door
>No<
If set to yes, the door is unlocked when all door areas are unset.
5.1.n.6.3.4 When set
1>Deny access
No
Define the door functionality when the assigned areas are set.
5.1.n.6.3.4.1 Deny access
1 Deny access
>No<
If set to Yes, the door access is denied unconditionally when any of door areas is
set.
5.1.n.6.3.4.2 Lock door
2 Lock door
>No<
If set to Yes, the door is locked when all door areas are set.
Summary of Contents for ATS1500A-IP-LP
Page 300: ...Chapter 6 Software 294 Advisor Advanced ATSx500A IP Installation and Programming Manual...
Page 306: ...Chapter 7 Troubleshooting 300 Advisor Advanced ATSx500A IP Installation and Programming Manual...
Page 316: ...Chapter 8 Regulations 310 Advisor Advanced ATSx500A IP Installation and Programming Manual...
Page 348: ...Glossary 342 Advisor Advanced ATSx500A IP Installation and Programming Manual...