Interlogix ATS1500A-IP-LP, Installation And Programming Manual

Page: 187 / 376

Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 181
4.1.n.6.35 Auto test
35 Auto test
>Yes<
If the option is set to yes, the detector will be tested automatically when auto test
is active. See also “1.2.1.8 Detector test” on page 124.
4.1.n.6.36 Shunt
36 Shunt
>Yes<
If the option is set to Yes, the zone can be shunted.
See “Zone shunt” on page 53 for details.
4.1.n.6.37 View isolated
37 View isolated
>On<
If the option is set to On, users are warned about this zone being isolated when
attempting to set or unset the appropriate area.
4.1.n.6.38 Stop report
38 Stop report
>No<
If the option is set to Yes, zone activation stops voice reporting, if active.
This option is only available for keyswitch type zones.
4.1.n.8 Copy
1>Copy params
>>>
Use Copy menu to copy zone parameters.
The following copy methods are available.
4.1.n.8.1 Copy par. from
Zone 1
Zone 2
Use the menu to import all zone parameters from a particular zone to the
selected one.
Choose the zone which parameters must be copied to the selected one, and
press Enter.
INFO
Params copied
All settings except the name are copied.