Interline 42250050, Instruction Manual

Page: 18 / 37

18
EN
7. OPERATING INSTRUCTIONS
3) Time settings
The lower display refers to the length of time. Press , you can set the desired time (5-90mins) using the /
keys. When count down to ‘‘00’’, the heaters will shut off automatically.
4) Sky light
Short press , you can set the desired colour (7 colours totally); long press to go into an automatically cycling
mode, changing every 5 seconds.
5) Fan
The fan has three modes: automatic, manual, close. The automatic mode is present when the heaters switch on. In
automatic mode, the fan switches on when the set cabin air temperature is reached. Press once for manual mode,
the fan switches on. Press once more for close mode, it switches off.
6) MP3 player
In the condition of connecting electricity, long press , the MP3 player power on, (if the player is inserted with a U
disk, it will acquiescently play U disk file), otherwise, the MP3 player will turn on Bluetooth by default. Then turn on the
Bluetooth search function of mobile phone and search ‘FJF-BT’Blueutooth device. The MP3 plaer can play music after
successfully connecting the phone (Note: each mobile phone just can connect one MP3 player). Press to pause
playing. Press to play the previous/next song. Press / the key to adjust the volume plus or minus,
the adjustment range is 0-32 level.
Press , the MP3 player cycle Bluetooth-MP3-external input -FM function.
Long press in the FM state, the MP3 player search and save the channels automatically, (channels from 87.5MHZ to
108.5MHZ. After the searching finish, press / , the MP3 player broadcast the stored channels.
Connect the power unit to wall outlet, the LED indicator will start to blink on the display.
Now it is possible to switch on the infrared heaters, the light and the music function.
1) Start up
Press to switch on the cabin and the heaters start to work, the length
of time is automatically set to 99 minutes and the air temperature inside
the cabin will be displayed. Press again switch off the heaters.
Press / / separately to adjust the power intensity of front/
back/calves heaters from 100%-0%.
2) Temperature settings
The upper display refers to the air temperature. Press , you can set
the desired temperature (35-60°C) using the / keys. When at this
temperature the heaters will stop working automatically; When it fall 4°C
below this temperature, the cabin will start up automatically.
Please note: The maximum air temperature reachable in the cabin
may be lower than the desired temperature. This is dependent on the
temperature outside the cabin. Default temperature = 40°C.