3
Operation
© 2021 Interflex Datensysteme GmbH
IF-261 Cabinet Lock
15
28. Press the cover lightly against the bottom and turn the lower screw
counterclockwise until it is flush with the surface of the cover
2.5 Programming
The programming of the Opendor
air
components is described in the IF-6040 documentation.
The programming of the Opendor
card
components is described in the
Interflex offline components
document.
3 Operation
The following sections describe the operation of the IF-261 Cabinet Lock. The technical basics can be
found in the separate document
1. Hold the credential in front of the lock.
If the credential is authorized, the LED will flash green briefly and the lock is opened.
Depending on the configuration, the Cabinet Lock is automatically locked after the closing time has
elapsed or it remains unlocked until a new booking is made.
If the bolt is blocked, e.g., due to the door not being fully closed, it retracts again.
3.1 Opening a door
To open a door that is secured with an Opendor component, hold the credential in the read area of the
Opendor component.
Depending on the configuration, the Door Handle is automatically locked after the closing time
has elapsed or it remains unlocked until a new booking is made.
LEDs and tone indicated the status of the booking:
Visual signal
Audible signal
Description
Green
Configurable using the door initialization card
(flag
sound during motor
)
Credential authorized
3 × red
3 x
Credential blacklisted, credential no
longer valid or booking was carried
out outside the time model
