Interflex Datensysteme GmbH
1/7
1 IF-812 or IF-815 Terminal (Slave)
Thank you for choosing an Interflex system. With an IF-812 or
IF-815 terminal (slave), you have purchased a reliable device
for capturing access data.
Furthermore, with an IF-815 terminal, you can also capture time
data and enter your PIN via a membrane keypad.
Scope of delivery:
IF-812 or IF-815 terminal (slave)
I/O
controller
board
Terminal
board
Mortise
lock
Material for wall mounting
Design frame optional
Please check the completeness and condition of the
shipment upon receipt.
2 Intended
Use
Slave terminals of the IF-812/IF-815 series are devices for capturing access data as well as for writing to
RFID credentials. Furthermore, with an IF-815 terminal (slave), you can also capture time data. The device is
designed for indoor and outdoor use (see note). Any other use is not in accordance with the intended
purpose and is therefore not permitted.
3 Assembly and Installation
The following installation procedure has been proven and tested:
1. Install the cables.
2. Install the power supply.
3. Mount the IF-812/IF-815 housing. If the terminal is to be used for access control, an I/O controller board
must also be mounted in a secured area.
4. Set the address.
5. Close the housing.
6. Put the IF-812/IF-815 into operation.
95-10324_V2016-11-23 IF-812/IF-815
