Accessorizing the Honey Badger
Protective Cap
Every Honey Badger flash head includes a protective cap. This cover offers protection to the glass dome,
flash tube, and LED modeling lamp during transportation and storage.
To remove the protective cap, pull back on the modifier quick release on the top of the flash unit to release
the mount lock. While holding back the release button, twist the protective cap counter-clockwise.
To replace the protective cap back on the flash unit, insert the three prongs of the cap into the mount and
rotate clockwise until you hear a click.
Bowens® Mount Modifiers
Modifying the light from your Honey Badger is key to creating dynamic images.
The Honey Badger can be used with any light modifier with a Bowens® mount.
To attach a Bowens® mount modifier to the Honey Badger, simply insert the three prongs
of the modifier ring into the mount and rotate clockwise until you hear a click. To remove
the modifier, pull back on the modifier quick release on the top of the flash unit to release
the mount lock and rotate the modifier counter-clockwise.
Softboxes
The variety of softbox shapes and sizes allow for endless lighting possibilities. The Honey Badger utilizes a
unique mounting system that fits softboxes with Bowens® mount speedrings as well as pop-up softboxes.
Pop-up softboxes (such as the one included in this kit) hold to the outside of the ring mount. Simply pull the
four sides of the light opening of your softbox around the outside of the mount ring and tension will hold it.
To attach a softbox with a Bowens® mount
speedring, simply insert the three prongs
of the speedring into the mount and rotate
clockwise until you hear a click. To remove
the softbox, pull back on the modifier quick-
release on the top of the flash unit to release
the mount lock and rotate the softbox
counter-clockwise.
Interfit offers a variety of light modifiers as
well as Bowens® speedrings to make your
favorite modifiers compatible.
www.interfitphotographic.com 4
