Using the Function Keys:
Volume:
Press the + to increase the volume and a beep corresponding to the audio
level will sound every time when the + is pressed.
Press the
to decrease the volume and a beep corresponding to the
audio level will sound every time when the - is pressed.
The beeps will stop after the level reaches the max & the min.
LOCK:
Press the
LOCK
button to engage into
monitor mode
. In the monitor
mode the system is constantly on.
We have replaced
voice activation
with constant on. There is no need
to raise your voice to activate the mode anymore. Constant-on eliminates
such problems like
missing the first part of the conversation
which is a
common defect among
voice activation
design. It also eliminates the
problem of not triggering the
voice activation
if the sound is not loud
enough. Only one party is able to engage in the monitor mode at any given
time. To talk to the party being monitored, the LOCK button at the
monitored unit must be disengaged. Depress the LOCK button or pressing
any function button will de-activate the LOCK mode.
TALK:
Press the
TALK
button to initiate a conversation. Depress the button to
wait for the reply.
CALL:
Press the
CALL
button to "ring" your intended party. A ring tone is
generated to the intended party that you are calling. Depress the button to
terminate the ringing.
Standby:
Idling all function buttons (LOCK, TALK, and CALL) will put the system
into a standby mode such as waiting for incoming communication
6
Using The Channel Keys & Channel Setup
Set all units to the same channel for Pan-Paging Communication Mode.
Functionality:
Any time when the LOCK, TALK & CALL function is pressed, the
conversation will be sent to all units on the same channel.
Recommended Usage:
1) Use in a PA system setup
2) Baby monitor throughout the whole system
Dedicated Communication:
Set each unit to different channels for designated communication
Functionality:
Any time when the LOCK, TALK & CALL button is pressed, the
conversation will only be sent to the unit that is on that designated
channel.
Recommended Usage:
For different parts of the household or different departments in the
business
Mixed Mode Communication:
Set some units on the same channel, while the remaining units on
different Channels.
Functionality:
Any time when the LOCK. TALK & CALL button is pressed, the
conversation will be sent to designated unit on the same channel. When
the conversation is ended, you can go back to monitoring channel.
Recommended Usage:
Set one unit in monitor mode on one channel. Set all remaining units to
other designated channels. From any of the remaining units, you can
switch the channel back and forth & use the system as monitors and
designated communicators.
7
Pan-paging Communication:
Summary of Contents for FM246
Page 2: ...NOTES...