© Intercoax Co., Ltd.
Digital tube and wireless channel comparison table
Digital tube
numericavalue
0
1
2
3
4
5
6
7
Wireless
channel
1
2
3
4
5
6
7
8
Digital tube
numericavalue
8
9
A
b
C
d
E
F
Wireless
channel
9
10
11
28
32
36
40
44
Î
The default channel bandwidth of the wireless bridge is
40MHz.
Î
The number of channels supported by some wireless bridges
will vary. Please refer to the actual product.
Indicator light state description
SIG1,
SIG2,
SIG3,
SIG4
Signal indicator
Master AP
:
Output power indicator lamp.
When the output power is between 3~9dbm,
the SIG1 light lit, the output power is between
10~16dbm, the SIG1-SIG2 lights lit, the output
power is between 20~22dbm, the SIG1-SIG3
lights lit, the output power is at 23dbm and
above, the SIG1 to SIG4 lights lit.
Subordinate AP
:
Signal connection intensity indicator.
Running flowing water light when connection fails.
When the connection is successful and the signal
intensity in the range of 0 ~ -65dbm, the SIG1
to SIG4 lights lit, the signal intensity in the -66
~ -75dbm, the SIG1 to SIG3 lights lit, the signal
intensity in -76 ~ -85dbm, the SIG1 to SIG2 lights
lit, the signal intensity in the -85dnm and below,
the SIG1 light lit
ETH
Port state indicator lamp
:
When the wire is connected, it is always bright
and goes out when it is broken.
Power indicator lamp
:
When the power is electrified, the lamp is always
bright and goes out when it is broken.
Digital tube indicator lamp
:
Short press “digital switch / reset” button, each
digital tube value will add one (0-9-A- F cycle)
Specification
IXWB-450
Chipset
MT7610E 450Mbps
Flash Memory
8MB (Up to 16MB Support)
Memory
1MB DDR RAM
Max.Transmission
Distance
2KM
Tansmission
Specification
1:1, Up to 1:N(1:8) Support
Frequency
5.150~5.825GHz
Wireless Standard 802.11a/n/ac 1T1R SISO
Wireless
Transmission
Speed
Up to 450 Mbps
Transmission
Power
Up to 20dBm
Antenna
14 dBi
TX Power
11a @54M:25±2DB, @6M:27±2DB,
11n @MCS7:23±2DB, @MCS0:25±2DB”
RX Sensitivity
11a: 72dbm@54Mbps, -90dbm@6Mbps
11n: -70dbm@MCS7, -90dbm@MCS0
Wireless Security
WPA/WPA2; WPA-PSK/WPA2-PSK
(AES/TKIP)
EVM
802.11n: ≤-28 DB
802.11a: ≤-25 DB
5G Channel
36, 40, 44, 48, 52, 56, 60, 64, 149, 153,
157, 161, 182, 186, 190, 194
LAN Port
2 10/100M adaptive LAN ports,
LAN1 support 24V PoE power supply
Switch/Button
[Master ↔ Slave] Dip Switch,
Reset Button, Digital Button
LED
Radio Signal Indicator Light
LAN Indicator Light
Power Indicator Light
Power
Consumption
<10W
Power Supply
Passive POE Power 24V 0.5A
DC 12V, 1A
Temperature/
Humidity
Operating Temperature: -40°C~55°C
Preserve Temperature: -40°C～70°C
Operating Humidity:
5%～90%RH non condensation
Preserve Humidity:
5%～90%RH non condensing
Dimension
90 x 260 x 40mm
Weight
Net Weight : 0.38 kg
Gross Weight : 0.59 kg
Certification
FCC, CE, KC
Fast Pairing of digital switch
█
One to one pairing method
1. Select dial a bridge to “M” and another bridge to “S”.
2. Short press “Dig SW/Reset” button, each digital tube value will
add one (0-9-A-F cycle).
3. The paired bridge is set to the same value and can be paired
successfully.
█
One to multiple pairing method
1. Select dial a bridge to “M” and the other bridges to “S”.
2. Short press “Dig SW/Reset” button, each digital tube value will
add one (0-9-A-F cycle).
3. The paired bridge is set to the same value and can be paired
successfully.
Please visit below website for more detailed information.
Web: http://www.intercoax.com Tel: +82. 31. 365. 3133~4
E-mail: [email protected]
Fax: +82. 31. 365. 3135
This device complies with part 15 of the fcc rules. Operation is subject to the
following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference
that may cause undesired operation
