Intercoax IXTS-160D, User Manual

Page: 15 / 63

14
6.3. Configure the device
█
Configuration of infrared
When the performance of the laptop or desktop is too low, the infrared picture may appear to be
jamming. The problem of jamming can be solved by changing the data rate to reduce the infrared
frame rate.
•
Example below: frame rate =50/2=25Hz
[ Infrared data configuration ]
█
Configuration of visible light
Visible video data: low-performance laptop or desktop computer are recommended to use
substream (640x480@10Hz) to adapt to face detection algorithm; High performance notebooks
or desktops (i7 or above) are recommended to use substream (640x480@25hz), to adapt to face
detection algorithm. The notebook must use an external adapter.
Use the software of the visible light supplier (Internet Explorer browser is recommended) to
configure video data.
[ Visible light configuration ]