Applications
AC 100-240V
PoE
Camera
ECP-2704T
Coax
NVR
Network Switch
ECP-2701
Coax
Coax
Coax
■ ECP-2816RM
ECP-2701
ECP-2701
ECP-2701
Computer
(NMS)
Caution
Please install the device following the installation guide.
Do not touch the device and cable with wet hands.
Keep away from moisture and shock.
Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus that produce heat.
Indoor use only.
Do not use for other purposes.
Do not disassemble or modify this device.
Do not put any sticker or paint on it.
If this device is defective or malfunctioning, please unplug the
power adapter immediately and contact dealer or service center.
Please use the rated power supply for the product.
Connect DC power to this device first and then to AC outlet.
Warranty
This device has passed the quality control and product inspection.
Please install and use according to the installation guide.
The warranty period for this product is 24 months from the date
of purchase.
If this device is defective or malfunctioning, please unplug the
power adapter immediately and contact dealer or service center.
Any damages or breakage from user’s abuse, accident,
modification or natural disasters will not be covered
manufacturer’s warranty.
Please visit below website for more detailed information.
Web: http://www.intercoax.com
Tel: +82. 31. 365. 3133~4
E-mail: [email protected]
Fax: +82. 31. 365. 3135
This device complies with part 15 of the fcc rules. Operation is subject to the
following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference
that may cause undesired operation
© Intercoax Co., Ltd.
Installation Guide
Check LEDs
UTP cable (Cat5e or better)
NVR / Switch / PC
ECP Tx
Coaxial cable (RG58 or better)
UTP cable (Cat5e or better)
PoE Camera
Power Cable & Power switch ON
ECP-2808RM/2816RM
ETHERNET
PoE-ON
Data-Link
Join-Link
Power
PoE
Bracket
Join
ON OFF
1. Apply power to the ECP-2808/16RM.
2. Use a Coaxial cable to connect the ECP-2808/16RM and the ECP transmitter.
Check that the
Power
LED and
B-Linx
LED of the ECP-2808/16RM are On.
Check that the
Power
LED and
Join
LED of the ECP Transmitter are On.
Î
The
Join LED
on the ECP-2808/16RM and ECP Transmitters will blink regularly if both devices are joined with the same password. All ECP Products
have the same network password as factory default, to support Plug & Play configuration between ECP Series.
If the
Join LED
is off on both ECP-2808/16RM and ECP Transmitter, joining work is necessary. Instructions on joining (Network Grouping Software
Manual) can be downloaded on Intercoax’ website (www.intercoax.com).
3. Connect the ECP Transmitters to the IP cameras.
Î
If using a PoE IP Camera, please select PoE Switch ‘On’ on the ECP Transmitter.
4. Connect the ECP-2808/16RM to the network Switch, NVR or PC using a UTP cable (Cat5e or better).
ECP MANAGER
1. In your network settings, set your PC’s IP address to
192.168.4.xxx and subnet mask to 255.255.255.0
2. Open the web browser and enter http://192.168.4.17, factory
default IP address of the ECP Managed switch.
3. Login window will open on the web browser.
Default ID / PW : admin / admin
4. Open the Setting page and change the IP address to your
desired address, the Login ID and Password.
