SAMXQ User Guide V1.1
17
APN: telstra.extranet
USERNAME: intercel
PASSWORD: mach
LTCPPORT: 10000
RTCPIP: 203.45.1.236
RTCPPORT: 10000
TCPMODE: 0
LUDPPORT: 20000
RUDPIP: 203.45.1.236
RUDPPORT: 20000
BAUDRATE: 115200
DATALEN: 8
PARITY: NONE
POLLPERIOD: 60
RESETPERIOD: 1440
SBREAKTIME: 100
MBREAKTIME: 5
SERIALLOCK: 0
LOGINTIMEOUT: 300
SESSIONIDLETIME: 120
PPPAUTH: CHAP
SAMMODE: 0
OK
AT$UDPCONNECT
If the modem is already allocated an IP address, this command will put the modem in UDP data mode, the
modem DCD pin goes high, data from serial will be packetized into UDP packets and sent to remote UDP
server (UDP settings must be set prior), modem will return to AT Command mode if it receives no UDP data
in 30 seconds.
AT$TCPCONNECT
If the modem is already allocated an IP address, this command will make a TCP client connection to the remote
TCP server, the modem will return to AT Command mode if it receives no TCP ACK in 30 seconds.
AT$DDNS
Use to setup parameters required for Dynamic DNS updating.
Parameters are defined as:
DDNSENABLE= 0 or 1 (0 disable, 1 enable)
DDNSHOST=Host name
DDNSUSERNAME=DNNS account name
